Kyotechs 29335: Precision and Efficiency Redefined

1.The climate is cold in winter, the ambient temperature is low, the viscosity of the engine oil increases, and the friction resistance of each moving part increases, which reduces the starting speed and makes it difficult to start.

2.The battery capacity decreases as the temperature drops, which further reduces the starting speed.

3.Due to the reduction in starting speed, the leakage of compressed air increases, and the heat dissipation of the cylinder wall increases, which greatly reduces the temperature and pressure of the air at the end of compression, and increases the delay period of diesel ignition. In severe cases, it may even fail to burn.

4.The viscosity of diesel at low temperatures increases, which reduces the injection speed. In addition, the swirl speed, temperature and pressure of the air at the end of compression are relatively low, which makes the atomization quality of the diesel injected into the cylinder poor, making it difficult to quickly form a good combustible gas with the air and ignite and burn in time, or even fail to ignite, resulting in difficulty in starting.

In the field of modern engineering machinery, excavators play a vital role, and behind this, there is a company that is quietly adding momentum to the industry, that is Kyotechs. With the mission of "building a community of shared destiny for partners and adding strength to the excavator industry", Kyotechs is not only committed to providing high-quality excavator parts, but also promoting the development of the entire industry with a long-term vision and innovative thinking.

In an increasingly competitive market environment, the era of fighting alone is over, and win-win cooperation is the key to future development. Therefore, the company has always been committed to building a close community of shared destiny for partners. This is not just a simple business cooperation, but also a deep collaboration based on trust, mutual assistance and common goals.

In this community of shared destiny, Kyotechs shares information, resources and opportunities with suppliers, customers, technical partners and other relevant parties. In this way, the company can not only respond quickly to market needs, but also foresee and respond to industry challenges in advance. The success of our partners is our success. It is this concept of symbiosis and win-win that has established a good reputation for Kyotechs in the industry.

As a company focusing on excavator parts, Kyotechs' products cover hydraulic pumps, engine parts, electronic controllers, transmission system parts and other fields. These high-quality parts not only ensure the efficient operation of the excavator, but also play an important role in improving overall engineering efficiency and reducing equipment failures.

Kyotechs not only pursues commercial success, but also takes "becoming a happy person in the field of excavation equipment" as its vision, emphasizing the happiness and satisfaction of all stakeholders. This vision reflects the company's deep care for employees, customers and society.

For Kyotechs, customer satisfaction is an important criterion for measuring our success. The company has always been customer-oriented and provides high-quality products and a full range of services. Whether it is product quality, delivery speed or after-sales service, Kyotechs strives to do its best to ensure that every customer can enjoy an experience beyond expectations.

1. There must be enough starting speed. The high starting speed means less gas leakage in the cylinder, shorter heat transfer time of compressed air to the cylinder wall, less heat loss, and higher gas temperature and pressure at the end of compression. Generally, the speed is required to be above 100r/min.

2. The cylinder should have good sealing. This can further reduce the amount of leakage and ensure that the gas has sufficient combustion temperature and pressure at the end of compression. The compression pressure of the cylinder shall not be lower than 8_0_%_ of the standard value.

3. The engine is required to have appropriate clearance relative to the running parts and good lubrication.

4. The battery must have sufficient starting capacity and the technical condition of the starting circuit is normal.

5. The starting oil volume meets the requirements, the injection quality is good, and the injection advance angle meets the requirements.

6. Use fuel that meets the requirements

If the engine has trouble starting, first check the battery charge and connections. Ensure the fuel system is supplying fuel by inspecting the fuel pump and fuel lines for blockages. Check the glow plugs (for diesel engines) or spark plugs (for gasoline engines) for wear and replace them if necessary. Use a diagnostic tool to check for any fault codes that might indicate issues with the engine control unit (ECU) or sensors.