High-Quality E323D Injector | Kyotechs Excavator Parts

After the newly purchased battery is injected with the liquid with the appropriate specific gravity, it should be placed for 6-8 hours to allow the liquid to penetrate the plates. When the temperature of the liquid drops below 30℃, it can be charged for the first time. The initial charge should be carried out in two stages. The charging current in the first stage should be lower than 1/10 (one tenth) of the rated capacity of the battery, and the time is about 25-35 hours. When the voltage of a single cell rises to 2.4 volts, the current is reduced by half and the second stage is entered, which takes about 20-30 hours. When the electrolyte emits strong bubbles and the specific gravity no longer rises, the voltage of a single cell rises to 2.6-2.75 volts and remains unchanged for 2-3 hours, it means that the battery is fully charged. During charging, the temperature of the electrolyte will rise, exceeding 40℃ in summer and 35℃ in winter. Charging should be suspended and recharged when the temperature drops below 30℃ to prevent damage to the plates and separators.

The way to remove air is to slowly operate all functions of the hydraulic system until the air is exhausted, and check and maintain the hydraulic oil level during this process.

1. Chain off caused by tension cylinder failure
At this time, you should check whether you have forgotten to butter the tension cylinder and see if there is any oil leakage in the tension cylinder.

2. Chain off caused by severe wear of the crawler
If used for a long time, the crawler will definitely be worn, and the wear of the chain ribs, chain barrels and other parts on the crawler will also cause the crawler chain off.

3. Chain off caused by wear of the chain guard
Now almost all excavator crawlers have chain guards, and chain guards can play a very important role in preventing chain off, so it is also very important to check whether the chain guard is worn.

4. Chain off caused by wear of the drive motor ring gear
For the drive motor ring gear, if it is severely worn, we need to replace it, which is also an important reason for the excavator chain off.

5. Chain off caused by damage to the sprocket wheel
Generally speaking, oil leakage of the sprocket wheel oil seal of the excavator will cause severe wear of the sprocket wheel, which will cause the crawler chain off. The public account Zhizao Daguan focuses on sharing relevant theoretical knowledge in the engineering machinery manufacturing industry.

6. Chain derailment caused by guide wheel damage
When checking the track guide wheel, check whether the screws on the guide wheel are missing or broken. Check whether the groove of the guide wheel is deformed.

The reasons for not working include power supply problems, low hydraulic oil level, filter blockage, hydraulic line leakage and pump internal component failure.